Ricoh B079 Service Manual page 282

SERVICE PROGRAM MODE TABLES
SP5 Mode Number
5857 Debug Log Save Function
1 On/Off (1:ON 0:OFF)
2 Target (1:IC Card 2:HDD)
3 Initialize IC Card
4 Save to IC Card
5 Save to HDD
7 HDD to IC Card (Latest
4MB)
8 HDD to IC Card (Latest
4MB Any Key)
11 Erase Debug Data From
HDD
5858 Debug Log Save Function
1 Engine SC Error
2 Controller SC Error
3 Any SC Error
4 Jam
5859 Debug Log Save Function
1 Key 1
2 Key 2
3 Key 3
4 Key 4
5 Key 5
6 Key 6
7 Key 7
8 Key 8
B079/B082
CÓPIA NÃO CONTROLADA
Function and [Setting]
Switches the debug log feature on and off. The
debug log cannot be captured until this feature is
switched on.
[0 ~ 1 / 0 / 1]
0: OFF
1: ON
Select "1" (IC Card) if an HDD unit is not installed in
the machine, or if the HDD unit is temporarily out of
service. The IC card can store only 4 MB so use the
HDD selection.
Initializes the IC card inserted into the controller
slot. Initializing erases all data on the IC card. Use
to initialize a new card. DFU
Saves the debug log in memory to the IC card. DFU
Saves the debug log in memory to the HDD. DFU
A unique file name is generated to avoid overwriting
existing file names on the SD Card. Up to 4MB can
be copied to an SD Card. 4 MB segments can be
copied one by one to each SD Card.
Copies the latest 4 MB of the debug log on the
HDD to the IC card. This function erases all data
from the IC card as it copies.
Copies the latest 4 MB of the debug log on the
HDD to the IC card, but only those portions of the
log specified with a key specified with SP5859
(Debug Save Key No.) This function erases all data
from the IC card as it copies.
To enable this SP, the machine must be cycled off
and on.
Erases all debug log data from the IC card. DFU.
These SPs select the content of the debugging
information to be saved to the destination selected
by SP5857 002.
Stores SC codes generated by copier engine
errors.
Stores SC codes generated by GW controller
errors.
Stores one SC specified by number.
[0~65535 / 0 / 1]
Refer to Section 4 for a list of SC error codes.
Stores jam errors.
These SPs allow you to set up to 10 keys for log
files for functions that use common memory on the
controller board. (!5.3.1)
[-9999999~9999999 / 0 / 1]
5-56
CÓPIA NÃO CONTROLADA
SM