Ricoh B079 Service Manual page 286

SERVICE PROGRAM MODE TABLES
SP6 Mode Number
6016*
6017* Sheet Through Magnification
6105* Staple Position Adjustment
6113* Punch Hole Adjustment
1* 2-Holes
2* 3-Holes
6902* Fold Position Adjustment
1* A3/DLT
2* B4
3* A4/LT
B079/B082
CÓPIA NÃO CONTROLADA
Europe
Bit
2
1
0
Adjusts the magnification in the sub-scan
direction for ADF mode.
[–50.0 ~ +50.0 / 0.0 / 0.1%/step]
Use the  key to toggle between + and - before
entering the value
Adjusts the staple position in the main scan
direction when using the two-tray finisher.
[–3.5~+3.5 / 0.0 / 0.5 mm step]

Press
staple toward the edge of the paper.
Adjusts the punch hole position.
[–7~+7 / 0 / 0.5 mm steps]

Press
holes toward the edge of the paper.
2-hole punches for Japan, North America,
Europe, and 4-hole punches for Northern Europe.
3-hole punches for North America, and 4-hole
punches for Europe.
Allows fine adjustment of the fold position on
paper when the Booklet Finisher is connected
and used.
[-30~+30 / 0 / 0.5 mm]
[-20~+20 / 0 / 0.5 mm]
[-15~+15 / 0 / 0.5 mm]
5-60
CÓPIA NÃO CONTROLADA
Function and [Setting]
0
DLT SEF
LT SEF
LT LEF
±
to toggle . A larger value shifts the
±
to toggle . A larger value shifts the
1
8-K SEF
16-K SEF
16-K LEF
SM