Ricoh B079 Service Manual page 273

SP5 Mode Number
5828* 90* Use Telnet
91 Web Monitor Image
5832 HDD
1 HDD Formatting (ALL)
2 HDD Formatting (IMH)
3 HDD Formatting
(Thumbnail)
4 HDD Formatting (Job Log)
5 HDD Formatting (Printer
Fonts)
6 HDD Formatting (Address
Book)
7 HDD Formatting (Mail RX
data)
8 HDD Formatting (Mail TX
data)
9 HDD Formatting (Data for a
Design)
11 HDD Formatting (Ridoc I/F)
5833 Job Log Transfer On/Off Setting
5834 Enable Operation Panel Image
Settings
5836 Capture Setting
1* Capture Function (0:Off
1:On)
2* Panel Setting
SM
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE TABLES
Function and [Setting]
This setting determines whether Telnet is started or
not.
[0~1 / 1 / 1]
If not started, the Telnet port is closed.
Determines whether Web Image Monitor is enabled
or disabled.
[0~1 / 1 / 1]
1: Enabled
0: Disabled
Enter the SP number for the partition to initialize,
then press #. When execution ends, cycle the
machine off and on.
Switches the job log transfer on/off for Poplar
server.
0: Off (disable), 1: On (enable)
Enables and disables the operation panel read
(dump) feature. After powering on the machine,
set this option to 1 to enable this feature.
0: Off (disable), 1: On (enable)
To reset the machine to 0, the machine must be
turned off and on again. Selecting 0 for this option
without cycling the power off and on does not
restore the default setting (0).
With this function disabled, the settings related to
the capture feature cannot be initialized, displayed,
or selected.
[0~1/0/1]
0: Disable
1: Enable
Determines whether each capture related setting
can be selected or updated from the initial system
screen.
[0~1/0/1]
0: Disable
1: Enable
The setting for SP5836 001 has priority.
5-47
CÓPIA NÃO CONTROLADA
B079/B082