Panasonic KX-TVP50 Installation Manual page 278

D6 RECORDING MESSAGES
e)
Record a prompt at the tone and Press [1] to end recording.
f)
Press [2] to accept the recorded prompt.
g)
The VPS plays the next prompt number.
h)
Record other prompts by repeating Steps 7d through 7g.
Note
User prompts can be saved in a personal computer (command SAVE through the RS-232C).
Once they have been saved, they can be restored (with the command LOAD) at any time. The
list of modifiable prompts and prompt numbers are located at the end of this section.
Recording System Caller Names
1.
Log in the Main Menu.
2.
Press [5] to modify messages.
3.
Press [8] to modify system caller names.
4.
Enter the Caller ID List Number
Note
• Enter [ ] to return to Step 3.
• To record system caller names, first Caller ID numbers must be assigned (see B6.6
5.
The VPS plays the Caller ID number and its name. To change the name, Press [1]. If a name
has not yet been recorded for this Caller ID number, go to Step 6.
Note
• Press [2] to accept the current name. - Return to Step 4.
• Press [3] to erase the current name. - Return to Step 4.
Guidance is "Caller Name Announcement number".
*1
278
Note
• Press [1] to review the recorded prompt.
• Press [3] to erase the recorded prompt and try again.- Return to Step 7e.
• Press [4] to add a message.
• Press [ ] to erase the recorded prompt and exit. - Go to Step 7g.
System Caller Name Announcement.)
(1-120) to be modified.
*1
MESSAGE MANAGER'S GUIDE