Panasonic KX-TVP50 Installation Manual page 221

be heard when the callers use the Intercom Paging features. The recorded names will be added
to the end of the page.
The Caller ID Screening feature is enabled or disabled in the COS (Class of Service) settings.
This feature is also enabled by selecting "Call Screening" in 4.1 Call Transfer Status in the
Subscriber's Guide.
The Intercom Paging feature is enabled by selecting "Intercom Paging" in 4.1 Call Transfer
Status, and/or in 4.3 Incomplete Call Handling in the Subscriber's Guide.
System Caller Names are recorded by the Message Manager.
To access the proper menu for System Caller Name Announcement, follow the menu
path as shown:
System Administration Top Menu - 1 - 5 - 6
System Caller Name Announcement - Enter
To access the proper menu for System Caller Name Announcement — Enter, follow
the menu path as shown:
System Administration Top Menu - 1 - 5 - 6 - 1 - Caller ID List No. (1-120)
Parameter
Caller ID No.
Description
System Caller Name Announcement - Delete
Permits specified Caller ID List numbers to be deleted from the list.
To access the proper menu for System Caller Name Announcement — Delete, follow
the menu path as shown:
System Administration Top Menu - 1 - 5 - 6 - 2 - Caller ID List No. (1-120)
System Caller Name Announcement - Listing
Displays all Caller ID List numbers.
SYSTEM ADMINISTRATOR'S GUIDE
Value Range
(Default)
Up to 20 digits Assigns the telephone number for which the VPS
consisting of 1-9, 0 announces pre-recorded caller name to extension
(None) users.
Up to 20 characters Enters a name and/or description of the Caller ID
(None) number. Any ASCII character (except \) can be used.
B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
Table 55
Description/Function
221