Panasonic KX-TVP50 Installation Manual page 206

B5 SYSTEM ADMINISTRATION - SERVICE SETTINGS
Alternate Extension Assignment
Used to assign extensions that should be transferred differently from the normal extension
transfer sequence. Calls to the extensions in this group will be transferred following the
sequence defined by "Alternate Extension Transfer Sequence" (See "Alternate Extension
Transfer Sequence" in Table 70 in B7.3 PBX Interface Parameters).
To select the Alternate Extension Assignment Parameter, follow the menu path as
shown:
System Administration Top Menu - 1 - 4 - 1 - 3
Alternate Extension Group - Enter
The system can create up to 32 extensions that use the same alternate transfer sequence.
To select the Alternate Extension - Enter Parameter, follow the menu path as shown:
System Administration Top Menu - 1 - 4 - 1 - 3 - 1
Parameter
Alternate
Extension
(1-32)
Alternate Extension - Delete
The system can delete extension numbers from the alternate extension group.
To select the Alternate Extension - Delete Parameter, follow the menu path as shown:
System Administration Top Menu - 1 - 4 - 1 - 3 - 2
Alternate Extension - Listing
Lists all of the extensions registered in the alternate extension group.
206
Table 44
Value Range
(Default)
2-5 digits Specifies an extension, which requires a different
(None) transfer sequence than normal.
Note: The Extension Group List or Logical Extension
Numbers cannot be assigned.
Description/Function
SYSTEM ADMINISTRATOR'S GUIDE