Panasonic KX-TVP50 Installation Manual page 165

FEATURE
Message Delivery
Status
Message Reception
Mode
Message Scan
SYSTEM FEATURES
DESCRIPTION
allows a subscriber to check the status of
messages that have been sent. The sending
subscriber has the option of canceling any of
the messages after checking their status. If a
message has not been received, the VPS will
voice report the following — when the
message was recorded, the destination
mailbox number, and the contents of the
message.
Message delivery status information is
automatically deleted after the message has
been received by the subscriber, or when the
subscriber cancels the delivery, or when a
new message arrives after 84 delivery status
messages have been stored in the subscriber's
mailbox (the oldest status message is always
deleted first).
allows incoming calls to be received by either
a subscriber's regular or interview mailbox.
This mode is effective only for Incomplete
Call Handling Service (when the subscriber's
line is busy, or he cannot take the call, or
when he has enabled Call Blocking).
permits the subscriber to scan the first 4 s of
each message. The subscriber can replay the
previous message, play the next message, or
play the entire message.
Table 31
• See 3.2
• See "Interview Service" in this
• See 4.4
• See "Message Scanning with
• See C3 SETTING COS
• See "Scanning Messages" in
• See 2.1
A1 SYSTEM FEATURES
REFERENCE
Checking Mailbox
Distribution in the Subscriber's
Guide.
Table.
Message Reception
Mode in the Subscriber's Guide.
Information" in Table 36 in
B3 SYSTEM
ADMINISTRATION -
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
(CLASS OF SERVICE)
PARAMETERS.
Glossary.
Receiving Messages
in the Subscriber's Guide.
165