Panasonic KX-TVP50 Installation Manual page 189

Parameter
Direct Mailbox
Access
Intercom
Paging Group
Prompt Mode
Number of
CIDs for Caller
Name
Announcement
Personal
Greeting for
CID
Caller ID
Screening
SYSTEM ADMINISTRATOR'S GUIDE
B3 SYSTEM ADMINISTRATION - SETTING COS (CLASS OF SERVICE) PARAMETERS
Value Range
(Default)
1. Yes If set to "Yes," a Subscriber is able to directly enter the
2. No Subscriber Service. This is accomplished by calling a
(Yes) VPS extension directly from the Subscriber's extension.
The Subscriber Service Access Code ( + mailbox
number) should not be dialled. Password entry may be
required if specified beforehand.
Note: The Direct Mailbox Access feature is available if
APT/DPT Voice Mail Integration is activated with a
Panasonic KX-TA series or KX-TD series telephone
system.
1-9 Specifies the Intercom Paging group number available to
(COS NO.1-9 the Subscriber.
:Group 1-9 If set to "9," the Intercom Paging feature is activated for
COS NO.10-62 all groups .
: Group 1)
Note: The Intercom Paging feature is available if APT/
DPT Voice Mail Integration is activated with a Panasonic
KX-TA series or KX-TD series telephone system.
1. System Specifies the language used for voice prompts played for
2. User 1 the Subscriber during a Message Waiting Notification
3. User 2 Call and Subscriber Service.
(System)
Note: If User 2 is specified as Prompt Mode but not
recorded by the Message Manager, the VPS will
automatically play the factory recorded System Prompts
in English. By default, User 2 Prompts are not recorded.
0 - 30 Specifies the maximum number of Caller IDs which
(30) Subscribers can assign for the Personal Caller Name
Announcement.
1. Yes If set to "Yes", Subscribers can utilise the personal
2. No greeting feature for Caller ID.
(Yes)
1. Yes If set to "Yes", Subscribers can utilise the Caller ID
2. No Screening feature.
(Yes)
Table 36
Description/Function
189