Panasonic KX-TVP50 Installation Manual page 45

answer. PBXs differ in how they handle this function. Test from an SLT to determine the
sequence.
• Reconnect Sequence on Refused Call:
Tells the VPS how to return to the caller if the extension dialled has Call Screening enabled
and the subscriber chooses not to take the call. PBXs differ in how they handle this function.
Test from an SLT to determine the sequence.
• Light On Sequence for Message Waiting Lamp:
This is the dialling sequence that the VPS must use to turn on a message waiting lamp at
an extension.
• Light Off Sequence for Message Waiting Lamp:
This is the dialling sequence that the VPS must use to turn off a message waiting lamp at
an extension.
• Call Waiting Sequence:
This sequence is carried out by the VPS to perform call waiting when the extension being
called is busy. PBXs differ in how they handle this function. Test from an SLT to determine
the sequence.
• Release Sequence for Call Waiting:
This sequence is carried out by the VPS to release call waiting. PBXs differ in how they
handle this function. Test from an SLT to determine the sequence.
Inband Signalling
These parameters are used when the Integration Mode is set to Inband. If the PBX type is set
to a KX-T series system, these parameters will be automatically set. If another type PBX is
used, check that system's installation manual for settings.
Code
(default)
1
2
3
4
5
6
INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Call State
Ringback Tone The extension dialled is ringing.
Busy Tone The extension dialled is busy.
Reorder Tone An invalid extension number is dialled or the call is
inadvertently connected to another Voice Mail port (also
heard when no DTMF receiver is available to the Voice Mail
extension).
DND The extension dialled has set DND feature (Do Not
Disturb).
Answer The extension dialled is answered.
Forwarded to Voice The extension dialled is forwarded to Voice Mail and
Mail (Ringing) another Voice Mail port is able to answer. (This lets the first
Voice Mail port, usually an Auto Attendant, send the call to
the other Voice Mail port.)
3.2 PBX PARAMETERS AND PORT SETTINGS
Table 11
Sent to the Voice Mail Port When...
45