Panasonic KX-TDA100D Programming Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Conference System
  5. KX-TDA100D
  6. Programming manual

Panasonic KX-TDA100D Programming Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA100D:
Table of Contents

Advertisement

Quick Links

See also: Feature Manual , User Manual
PT Programming Manual
WWW.ERTEBATGROUP.COM
Hybrid IP-PBX
KX-TDA100D
Model No.
Thank you for purchasing a Panasonic Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDA100D: PDMPR Software File Version 5.1000 or later
WWW.ERTEBATGROUP.COM

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-TDA100D

Summary of Contents for Panasonic KX-TDA100D

  • Page 1 PT Programming Manual WWW.ERTEBATGROUP.COM Hybrid IP-PBX KX-TDA100D Model No. Thank you for purchasing a Panasonic Hybrid IP-PBX. Please read this manual carefully before using this product and save this manual for future use. KX-TDA100D: PDMPR Software File Version 5.1000 or later WWW.ERTEBATGROUP.COM...

  • Page 2: Safety Notices

    Introduction About this Programming Manual The PT Programming Manual is designed to serve as a reference to programming the Panasonic Hybrid IP-PBX using a Panasonic proprietary telephone (PT) with display. The PT Programming Manual is divided into the following sections: Section 1, Overview Provides an overview of programming the PBX.
  • Page 3 • ONP 2048 kbit/s digital structured leased lines (D2048S) Panasonic System Networks Co., Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www.doc.panasonic.de...

  • Page 4: Table Of Contents

    Table of Contents WWW.ERTEBATGROUP.COM Table of Contents 1 Overview ....................9 Introduction ........................10 1.1.1 Introduction ........................10 1.1.2 Password Security ......................11 1.1.3 Entering Characters .......................12 2 PT Programming ..................15 PT Programming ......................16 2.1.1 Programming Instructions ....................16 2.1.2 Slot Number and Port Number ..................19 2.1.3 Basic Programming ......................20 [000] Date &...
  • Page 5 Table of Contents WWW.ERTEBATGROUP.COM [301] TRS/Barring Denied Code ..................29 [302] TRS/Barring Exception Code ................29 [303] Special Carrier Access Code ................29 [304] Emergency Number ....................29 [320] ARS Mode ......................29 [321] ARS Leading Number ..................30 [322] ARS Routing Plan Table Number ...............30 [325] ARS Exception Number ..................30 [330] ARS Routing Plan Time Table ................30 [331–346] ARS Routing Plan Table (1–16) ..............31...
  • Page 6 Table of Contents WWW.ERTEBATGROUP.COM [507] DND Override .....................39 [508] Account Code Mode ...................39 [509] TRS/Barring Level for System Speed Dialling ............39 [510] TRS/Barring Level for Extension Dial Lock ............39 [511] Manager Assignment ..................39 [512] Permission for Door Open Access ..............40 [514] Time Service Manual Switching .................40 [515] Wireless XDP Parallel Mode for Paired Telephone ..........40 [516] Programming Mode Limitation ................40...
  • Page 7 Table of Contents WWW.ERTEBATGROUP.COM [801] External Modem Control ..................49 [802] SMDR Page Length ....................50 [803] SMDR Skip Perforation ..................50 [804] SMDR Outgoing Call Printing ................50 [805] SMDR Incoming Call Printing ................50 [810] Remote Programming ..................50 [811] Modem Floating Extension Number ..............50 [812] ISDN Remote Floating Extension Number ............50 2.1.12 Card Programming ......................51...
  • Page 8 Table of Contents WWW.ERTEBATGROUP.COM PT Programming Manual WWW.ERTEBATGROUP.COM...

  • Page 9: Overview

    WWW.ERTEBATGROUP.COM Section 1 Overview This section provides an overview of programming the PBX. PT Programming Manual WWW.ERTEBATGROUP.COM...

  • Page 10: Introduction

    These programming instructions are designed to serve as an overall system programming reference for the Panasonic Hybrid IP-PBX. Each feature in the PBX has default settings that can be changed to customise the PBX to your requirements. These settings control the functions of the PBX, and changing them is referred to as "system programming".

  • Page 11: Password Security

    1.1.2 Password Security WWW.ERTEBATGROUP.COM 1.1.2 Password Security To maintain system security, system passwords are required to access certain programming functions of the PBX. By giving different users access to different passwords, it is possible to control the amount of programming that each user is able to perform. The following types of system passwords are available: Password Description...

  • Page 12: Entering Characters

    1.1.3 Entering Characters WWW.ERTEBATGROUP.COM 1.1.3 Entering Characters The following characters can be used when storing a name, message, or other text entry data using a PT. The tables below show you the characters available by pushing each button a specific number of times. Table 1 (Standard mode) Table 1 (Standard mode for RU model) PT Programming Manual...
  • Page 13 1.1.3 Entering Characters WWW.ERTEBATGROUP.COM Table 2 (Option mode) Table 2 (Option mode for model) PT Programming Manual WWW.ERTEBATGROUP.COM...
  • Page 14 1.1.3 Entering Characters WWW.ERTEBATGROUP.COM Table 2 (Option mode for RU model) [Example of Entering Characters] To enter "Ann": (5 times) (5 times) FWD/DND Note • To erase the character on the cursor, press CLEAR. • To move the cursor to the left, press •...

  • Page 15: Pt Programming

    WWW.ERTEBATGROUP.COM Section 2 PT Programming This section serves as reference operating instructions when using a display PT to programme the PBX. PT Programming Manual WWW.ERTEBATGROUP.COM...

  • Page 16: Pt Programming

    2.1.1 Programming Instructions WWW.ERTEBATGROUP.COM 2.1 PT Programming 2.1.1 Programming Instructions Required Telephone/Extension PBX settings can be customised through system programming by using a proprietary telephone (PT) with a multiline display, such as the KX-NT343 or KX-DT346. To access system programming, the Class of Service (COS) assigned to the PT’s extension must be programmed to allow system programming, or the PT must be connected to the lowest-numbered port on the card installed in the lowest-numbered slot.
  • Page 17 2.1.1 Programming Instructions WWW.ERTEBATGROUP.COM Fixed Buttons Function KX-NT300/KX-DT300 KX-NT136/KX-T7600 FLASH/ FLASH RECALL TRANSFER CLEAR INTERCOM SECRET Entering System Programming Mode Using a PT to perform system programming allows an authorised extension user to set a wide range of PBX features and parameters. There are two levels of system programming that can be performed with a PT: administrator-level programming and user-level programming.
  • Page 18 2.1.1 Programming Instructions WWW.ERTEBATGROUP.COM Programming Programming Group Title Description Number Trunk Programming Trunk, trunk group, and BRI line settings [4XX] COS Programming Class of Service parameters [5XX] Extension Programming Extension feature settings [6XX] Resource/Interface PBX interface and external device settings [7XX] Programming SMDR &...

  • Page 19: Slot Number And Port Number

    2.1.2 Slot Number and Port Number WWW.ERTEBATGROUP.COM 2.1.2 Slot Number and Port Number Some programming items require a slot number and port number to be entered, as in the example below. [410] Slot No. Port No. SELECT DTMF/Pulse ENTER ENTER Slot numbers and port numbers are entered as two-digit numbers (e.g., "04"...

  • Page 20: Basic Programming

    2.1.3 Basic Programming WWW.ERTEBATGROUP.COM 2.1.3 Basic Programming [000] Date & Time [In 12-hour Format] [000] Date Year Month 01–12 01–31 00–99 ENTER ENTER Minute Hour SELECT 00–59 (AUTO ANS/MESSAGE) 01–12 NEXT ENTER (HOLD) AM/PM [In 24-hour Format] [000] Year Date Month 01–12 00–99...

  • Page 21: Extension Name

    2.1.3 Basic Programming WWW.ERTEBATGROUP.COM Note • Extension numbers of PSs can be a maximum of 4 digits. • If PC Phone, PC Console, or a CTI application is running on a PC connected to an extension whose extension number is to be programmed/modified, quit the application first. [004] Extension Name [004] Name...

  • Page 22: Absent Message

    2.1.3 Basic Programming WWW.ERTEBATGROUP.COM [008] Absent Message [008] Message Location No. 1–8 Max. 16 characters ENTER ENTER [010] Charge Margin [010] Margin XX.YY% 2+2 decimal places ENTER ENTER [011] Charge Tax [011] Location No. Tax XX.YY% 01–03 2+2 decimal places ENTER ENTER [012] Charge Rate per Unit...

  • Page 23: System Management Programming

    2.1.4 System Management Programming WWW.ERTEBATGROUP.COM 2.1.4 System Management Programming [100] Flexible Numbering [100] Location No. Feature No. 01–68 1–4 digits ENTER ENTER (HOLD) To the Next Location No. To the Desired Location No. NEXT CANCEL [101] Time Service Switching Mode [101] SELECT (AUTO ANS/MESSAGE)

  • Page 24: Idle Line Access (Local Access)

    2.1.4 System Management Programming WWW.ERTEBATGROUP.COM [In 24-hour Format] [102] Hour:Minute Day No. Time No. 0 Sun/1 Mon/ 00:00–23:59 1 Day-1/2 Lunch/ ENTER ENTER 2 Tue/3 Wed/ 3 Day-2/4 Night 4 Thu/5 Fri/6 Sat To the Next Time No. To the Next Day No. NEXT Page up [103] Idle Line Access (Local Access)

  • Page 25: Verification Code Name

    2.1.4 System Management Programming WWW.ERTEBATGROUP.COM [121] Verification Code Name [121] Location No. Name 0001–1000 Max. 20 characters ENTER ENTER [122] Verification Code Personal Identification Number (PIN) [122] Location No. 0001–1000 Max. 10 digits ENTER ENTER CAUTION There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or extension PIN) of the PBX.

  • Page 26: Main Processing (Mpr) Software Version Reference

    2.1.4 System Management Programming WWW.ERTEBATGROUP.COM [190] Main Processing (MPR) Software Version Reference [190] MPR Version Reference only ENTER PT Programming Manual WWW.ERTEBATGROUP.COM...

  • Page 27: Timer Programming

    2.1.5 Timer Programming WWW.ERTEBATGROUP.COM 2.1.5 Timer Programming [200] Hold Recall Time [200] Time 0–240 s ENTER ENTER (HOLD) [201] Transfer Recall Time [201] Time 1–240 s ENTER ENTER [203] Intercept Time [203] Time No. Time No. Time 1 Day/2 Lunch 1–240 s ENTER ENTER...

  • Page 28: Door Unlock Time

    2.1.5 Timer Programming WWW.ERTEBATGROUP.COM [207] Door Unlock Time [207] Time 2–7 s ENTER ENTER [208] Call Duration Count Starting Time for LCOT [208] Time 0–60 s ENTER ENTER [209] DISA Delayed Answer Time [209] Time 0–30 s ENTER ENTER [210] DISA Trunk-to-Trunk Call Prolong Time [210] Time 0–7 min...

  • Page 29: Trs/Barring/Ars Programming

    2.1.6 TRS/Barring/ARS Programming WWW.ERTEBATGROUP.COM 2.1.6 TRS/Barring/ARS Programming [300] TRS/Barring Override by System Speed Dialling [300] SELECT (AUTO ANS/MESSAGE) ENTER ENTER Disable/Enable (HOLD) [301] TRS/Barring Denied Code [301] Level No. Location No. Denied Code 2–6 001–100 Max. 16 digits ENTER ENTER To the Next Location No.

  • Page 30: Ars Leading Number

    2.1.6 TRS/Barring/ARS Programming WWW.ERTEBATGROUP.COM [321] ARS Leading Number [321] Location No. Leading No. 0001–1000 Max. 16 digits ENTER ENTER [322] ARS Routing Plan Table Number [322] Location No. Plan Table No. 0001–1000 01–16 ENTER ENTER [325] ARS Exception Number [325] Location No.

  • Page 31: Ars Routing Plan Table (1-16)

    2.1.6 TRS/Barring/ARS Programming WWW.ERTEBATGROUP.COM [331–346] ARS Routing Plan Table (1–16) [331–346] Day No. Priority ARS Time No. 0 Sun/1 Mon/2 Tue/ 1 TimeA/2 TimeB/ 1–6 ENTER 3 Wed/4 Thu/5 Fri/6 Sat 3 TimeC/4 TimeD Carrier Table No. 1–10/None ENTER [350] ARS Carrier Name [350] Carrier Table No.

  • Page 32: Trunk Programming

    2.1.7 Trunk Programming WWW.ERTEBATGROUP.COM 2.1.7 Trunk Programming [400] LCOT/BRI Trunk Connection [400] Slot No. Port No. SELECT (AUTO ANS/MESSAGE) ENTER No Connect/ ENTER (HOLD) Connect To the Next Port No. To the Desired Port No. NEXT CANCEL [401] LCOT/BRI Trunk Name [401] Name Trunk No.

  • Page 33: Lcot Dtmf Minimum Duration

    2.1.7 Trunk Programming WWW.ERTEBATGROUP.COM [412] LCOT DTMF Minimum Duration [412] Slot No. Port No. SELECT 80/160 ms ENTER ENTER [413] LCOT CPC Signal Detection Time—Outgoing [413] Slot No. Port No. Mode No. 0: None/1: 6.5/ ENTER ENTER 2–113: (N–1)×8 ms [414] LCOT CPC Signal Detection Time—Incoming [414] Mode No.

  • Page 34: Lcot Disconnect Time

    2.1.7 Trunk Programming WWW.ERTEBATGROUP.COM [418] LCOT Disconnect Time [418] Slot No. Port No. SELECT 0.5/1.5/2.0/ ENTER ENTER 4.0/12.0 s [420] BRI Network Type [420] Slot No. Port No. Network Type 00–56 ENTER ENTER [421] BRI DIL/DDI/MSN Selection [421] Slot No. Port No.

  • Page 35: Bri Configuration

    2.1.7 Trunk Programming WWW.ERTEBATGROUP.COM [426] BRI Configuration [426] Slot No. Port No. SELECT P-P/P-MP ENTER ENTER Note After changing this setting, perform [902] Slot Card Reset to enable the new setting. [427] BRI TEI Mode [427] Slot No. Port No. 00–63 (for Fix)/ ENTER ENTER...

  • Page 36: Did Destination

    2.1.7 Trunk Programming WWW.ERTEBATGROUP.COM [453] DID Destination [453] Time No. Location No. Destination No. 1 Day/2 Lunch/ 0001–1000 1–5 digits 3 Break/4 Night ENTER ENTER [471] Host PBX Access Code [471] Trunk Group No. Location No. 01–10 01–64 ENTER Host PBX Access Code Max.10 digits ENTER [472] Extension-to-Trunk Call Duration...

  • Page 37: Disa Continuous Signal Detection

    2.1.7 Trunk Programming WWW.ERTEBATGROUP.COM [476] DISA Continuous Signal Detection [476] Trunk Group No. SELECT No Detect/ 01–64 ENTER ENTER Detect [477] DISA Cyclic Signal Detection [477] Trunk Group No. SELECT 01–64 No Detect/ ENTER ENTER Detect [490] Caller ID Signal Type [490] Slot No.

  • Page 38: Cos Programming

    2.1.8 COS Programming WWW.ERTEBATGROUP.COM 2.1.8 COS Programming [500] Trunk Group Number [500] Time No. COS No. 1 Day/2 Lunch/ 01–64 ENTER 3 Break/4 Night Trunk Group No. SELECT (AUTO ANS/MESSAGE) 01–64 ENTER (HOLD) Disable/Enable To the Next To the Next Trunk Group COS No.

  • Page 39: Executive Busy Override

    2.1.8 COS Programming WWW.ERTEBATGROUP.COM [505] Executive Busy Override [505] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [506] Executive Busy Override Deny [506] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [507] DND Override [507] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable...

  • Page 40: Permission For Door Open Access

    2.1.8 COS Programming WWW.ERTEBATGROUP.COM [512] Permission for Door Open Access [512] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [514] Time Service Manual Switching [514] COS No. SELECT Disable/ 01–64 ENTER ENTER Enable [515] Wireless XDP Parallel Mode for Paired Telephone [515] COS No.

  • Page 41: Extension Programming

    2.1.9 Extension Programming WWW.ERTEBATGROUP.COM 2.1.9 Extension Programming [601] Terminal Device Assignment [601] Slot No. Port No. SELECT Telephone/ (HOLD) ENTER ENTER DSS Console 01–08/ Voice Mail 1–(01–12)/ Voice Mail 2–(01–12)/ PC Console 1–8 Note When changing the type of a port for which one or more SDN buttons are set (except when changing between PC Console and Telephone), all SDN buttons customised for that device will be deleted.

  • Page 42: Clip/Colp Number

    2.1.9 Extension Programming WWW.ERTEBATGROUP.COM [606] CLIP/COLP Number [606] Extn. No. CLIP/COLP No. 1–5 digits Max. 16 digits ENTER ENTER [620] Incoming Call Distribution Group Member Incoming Call [620] Location No. Extn. No. Distribution 1–5 digits 01–32 Group No. ENTER 001–128 ENTER [621] Incoming Call Distribution Group Delayed Ringing Incoming Call...

  • Page 43: Incoming Call Distribution Group Distribution Method

    2.1.9 Extension Programming WWW.ERTEBATGROUP.COM [624] Incoming Call Distribution Group Distribution Method Incoming Call [624] SELECT Distribution Ring/UCD/ ENTER Group No. ENTER Priority Hunt 001–128 [625] Destination for Overflow Time Expiration Incoming Call [625] Destination No. Time No. Distribution Max. 32 digits 1 Day/2 Lunch/ Group No.

  • Page 44: Queuing Hurry-Up Level

    2.1.9 Extension Programming WWW.ERTEBATGROUP.COM [629] Queuing Hurry-up Level Incoming Call [629] Hurry-up Level Distribution None/1–30 Group No. ENTER ENTER 001–128 [630] Queuing Time Table Incoming Call [630] Time No. Table No. Distribution 1 Day/2 Lunch/ 01–64 Group No. ENTER 3 Break/4 Night 001–128 ENTER [631] Sequences in Queuing Time Table...

  • Page 45: External Pagers Of A Paging Group

    2.1.9 Extension Programming WWW.ERTEBATGROUP.COM [641] External Pagers of a Paging Group [641] Paging Group No. External Pager No. SELECT No/Yes 01–32 1–2 ENTER ENTER [650] Extension User Groups of a Pickup Group [650] Pickup Group No. Extn. User Group No. SELECT No/Yes 01–64...

  • Page 46: Idle Extension Hunting Group Member

    2.1.9 Extension Programming WWW.ERTEBATGROUP.COM [681] Idle Extension Hunting Group Member [681] Hunting Group No. Location No. 01–16 01–64 ENTER Extn. No. 1–5 digits ENTER [690] PS Registration [690] PS No. Extn. No. To the PS operation below 1–4 digits 001–128 ENTER ENTER KX-TD7684...

  • Page 47: Resource/Interface Programming

    2.1.10 Resource/Interface Programming WWW.ERTEBATGROUP.COM 2.1.10 Resource/Interface Programming [700] External Pager Floating Extension Number [700] Pager No. Extn. No. 1–5 digits 1–2 (HOLD) ENTER ENTER To the Next Pager No. To the Desired Pager No. NEXT CANCEL [710] Music Source Selection for BGM2 [710] SELECT (AUTO ANS/...

  • Page 48: Doorphone Number Reference

    2.1.10 Resource/Interface Programming WWW.ERTEBATGROUP.COM [729] Doorphone Number Reference [729] Doorphone No. Card No. and Port No. Slot No. 1–3 1–4 Reference only ENTER [730] Outgoing Message (OGM) Floating Extension Number [730] Message No. Extn. No. 01–64 1–5 digits ENTER ENTER [731] Outgoing Message (OGM) Name [731] Message No.

  • Page 49: Smdr & Maintenance Programming

    2.1.11 SMDR & Maintenance Programming WWW.ERTEBATGROUP.COM 2.1.11 SMDR & Maintenance Programming [800] RS-232C Parameter—New Line Code [800] Location SELECT (AUTO ANS/MESSAGE) ENTER ENTER CR+LF/CR (HOLD) [800] RS-232C Parameter—Baud Rate [800] Location SELECT 2400/4800/9600/ 19200/38400/57600/ ENTER ENTER 115200 bps [800] RS-232C Parameter—Word Length [800] Location SELECT...

  • Page 50: Smdr

    2.1.11 SMDR & Maintenance Programming WWW.ERTEBATGROUP.COM [802] SMDR Page Length [802] Page length 4–99 lines ENTER ENTER [803] SMDR Skip Perforation [803] Skip Perforation 0–95 lines ENTER ENTER [804] SMDR Outgoing Call Printing [804] SELECT No print/Print ENTER ENTER [805] SMDR Incoming Call Printing [805] SELECT No print/Print...

  • Page 51: Card Programming

    2.1.12 Card Programming WWW.ERTEBATGROUP.COM 2.1.12 Card Programming [900] Slot Card Type Reference [900] Slot No. Card Name Reference only (HOLD) ENTER [901] Slot Card Deletion [901] Slot No. Delete Confirming the ENTER ENTER deleting operation. To the Next Slot No. To the Desired Slot No.
  • Page 52 2.1.12 Card Programming WWW.ERTEBATGROUP.COM PT Programming Manual WWW.ERTEBATGROUP.COM...

  • Page 53: Feature Programming References

    WWW.ERTEBATGROUP.COM Feature Programming References PT Programming Manual WWW.ERTEBATGROUP.COM...
  • Page 54 Feature Programming References WWW.ERTEBATGROUP.COM Absent Message • [008] Absent Message Feature Guide References 1.19.2 Absent Message Account Code Entry • [508] Account Code Mode Feature Guide References 1.5.4.3 Account Code Entry Automatic Route Selection (ARS) • [320] ARS Mode • [321] ARS Leading Number •...
  • Page 55 Feature Programming References WWW.ERTEBATGROUP.COM Feature Guide References 1.13.1 Call Hold Call Pickup • [650] Extension User Groups of a Pickup Group Feature Guide References 1.4.1.3 Call Pickup Call Transfer • [201] Transfer Recall Time • [503] Call Transfer to Trunk •...
  • Page 56 Feature Programming References WWW.ERTEBATGROUP.COM • [004] Extension Name Feature Guide References 1.30.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG Class of Service (COS) • 2.1.8 COS Programming • [602] Class of Service Feature Guide References 2.2.1 Class of Service (COS) Dial Type Selection •...
  • Page 57 Feature Programming References WWW.ERTEBATGROUP.COM 1.17.6 Direct Inward System Access (DISA) Display Information • [130] Decimal Point Position for Currency • [131] Currency Feature Guide References 1.20.4 Display Information Do Not Disturb (DND) • [507] DND Override Feature Guide References 1.3.1.3 Do Not Disturb (DND) Door Open •...
  • Page 58 Feature Programming References WWW.ERTEBATGROUP.COM Feature Guide References 1.28.1 Extension Personal Identification Number (PIN) Extension Port Configuration • [007] DSS Console Paired Telephone Feature Guide References 2.1.1 Extension Port Configuration External Feature Access (EFA) • [417] LCOT Flash/Recall Time Feature Guide References 1.11.7 External Feature Access (EFA) Flash/Recall/Terminate •...
  • Page 59 Feature Programming References WWW.ERTEBATGROUP.COM Feature Guide References 1.5.4.8 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX) Hot Line • [204] Hot Line Waiting Time Feature Guide References 1.6.1.7 Hot Line Idle Extension Hunting • [680] Idle Extension Hunting Type •...
  • Page 60 Feature Programming References WWW.ERTEBATGROUP.COM Feature Guide References 1.1.1.6 Intercept Routing Intercept Routing—No Destination • [006] Operator Assignment Feature Guide References 1.1.1.7 Intercept Routing—No Destination Intercom Call • [003] Extension Number • [004] Extension Name Feature Guide References 1.5.3 Intercom Call Internal Call Features •...
  • Page 61 Feature Programming References WWW.ERTEBATGROUP.COM Music on Hold • [710] Music Source Selection for BGM2 • [711] Music on Hold Feature Guide References 1.13.4 Music on Hold Network Direct Station Selection (NDSS) • [511] Manager Assignment Feature Guide References 1.30.5.1 Network Direct Station Selection (NDSS) Operator Features •...
  • Page 62 Feature Programming References WWW.ERTEBATGROUP.COM Feature Guide References 1.15.1 Paging Pause Insertion • [416] LCOT Pause Time Feature Guide References 1.5.4.7 Pause Insertion PC Phone/PC Console • [601] Terminal Device Assignment Feature Guide References 1.32.2 PC Phone/PC Console Portable Station (PS) Connection •...
  • Page 63 Feature Programming References WWW.ERTEBATGROUP.COM 2.3.2 PT Programming Queuing Feature • [628] Queuing Call Capacity • [629] Queuing Hurry-up Level • [630] Queuing Time Table • [631] Sequences in Queuing Time Table • [632] Maximum Number of Agents Feature Guide References 1.2.2.4 Queuing Feature Reverse Circuit •...
  • Page 64 Feature Programming References WWW.ERTEBATGROUP.COM 1.26.1 Station Message Detail Recording (SMDR) Tenant Service • [001] System Speed Dialling Number • [006] Operator Assignment • [320] ARS Mode • [711] Music on Hold Feature Guide References 2.2.3 Tenant Service TIE Line Service •...
  • Page 65 Feature Programming References WWW.ERTEBATGROUP.COM 1.17.3 Trunk Answer From Any Station (TAFAS) Trunk Busy Out • [511] Manager Assignment Feature Guide References 1.5.4.6 Trunk Busy Out Trunk Call Limitation • [472] Extension-to-Trunk Call Duration • [473] Trunk-to-Trunk Call Duration • [502] Trunk Call Duration Limitation Feature Guide References 1.11.8 Trunk Call Limitation Verification Code Entry...
  • Page 66 Feature Programming References WWW.ERTEBATGROUP.COM Walking Extension • [007] DSS Console Paired Telephone Feature Guide References 1.28.3 Walking Extension Wireless XDP Parallel Mode • [515] Wireless XDP Parallel Mode for Paired Telephone Feature Guide References 1.25.5 Wireless XDP Parallel Mode PT Programming Manual WWW.ERTEBATGROUP.COM...
  • Page 67 Notes WWW.ERTEBATGROUP.COM PT Programming Manual WWW.ERTEBATGROUP.COM...
  • Page 68 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd.

Table of Contents