Panasonic KX-TVP50 Installation Manual page 60

4.2 CONNECTING THE KX-TVP50 WITH THE PANASONIC KX-TA series
a)
If the KX-TVP50 is answering all incoming calls:
b)
If the KX-TVP50 is only answering calls not answered by the operator (Operator
Backup):
c)
If the KX-TVP50 is only answering calls not answered by user extensions:
5.
Unplug or power down the KX-TA series.
6.
Connect the jack(s) assigned in Step 3 to the KX-TVP50.
7.
Connect your laptop computer to the KX-TVP50 and start your communication software
(i.e., HyperTerminal, Procomm Plus, Smartcom...).
60
Outside (CO) Line Mode—Use System Programs [414](Day Mode), [415](Night
Mode), [416](Lunch Mode) to set this parameter. Program all lines DIL to the first
extension of the Voice Mail hunt group. The KX-TA series will allow incoming
outside calls to hunt only if the outside (CO) lines are DIL to the first port of the hunt
group. Lines programmed as Normal do not hunt.
Flexible Ringing Assignment—For each outside (CO) line, use System Programs
[408](Day mode), [409](Night Mode) and [410](Lunch Mode) to enable ringing at
the operator's extension(jack).
Delayed Ringing Assignment — To give the operator time to answer the call before
the VPS picks up, we recommend setting the delay to 3 or 4 rings for each extension
connected to the KX-TVP50. Use System Programs [411](Day Mode), [412](Night
Mode) and [413](Lunch Mode).
Outside (CO) Line Mode — Set the mode for each CO to Normal. Use System
Programs [414 ](Day Mode), [415](Night Mode) and [416](Lunch Mode) to set this
parameter.
Table 14 2 Outside (CO) Lines, 2 Ports
Outside (CO)
Lines
1
2
Flexible Ringing Assignment — For each outside (CO) line, use System Programs
[408](Day Mode), [409](Night Mode) and [410](Lunch Mode) to enable ringing on
every extension (jack) that you want to have ring.
Delayed Ringing Assignment — To give users time to answer the call before the
VPS picks up, we recommend setting the delay to 3 or 4 rings for each extension
connected to the KX-TVP50. Use System Programs [411](Day Mode), [412](Night
Mode) and [413](Lunch Mode).
Outside (CO) Line Mode — Set the mode for each outside (CO) line to Normal. Use
System Programs [414](Day Mode), [415](Night Mode) and [416](Lunch Mode) to
set this parameter.
INTEGRATING THE VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL PBX
Ports
1, 2
1, 2