Panasonic KX-TVP50 Installation Manual page 49

4.
Enable hunting for the VPS extension groups using System Program [100].
5.
Set the hunting type for the VPS extension groups to circular using System Program [101].
6.
At every VPS extension, temporarily connect an SLT or butt set, go off-hook and dial 7301#
to turn on Data Line Security. This prevents the KX-TA series from sending Executive
Override or Call Waiting tones to these extensions. We recommend that all Voice Mail port
extensions have this feature enabled to avoid interruption of recording.
7.
Select the appropriate outside (CO) line feature settings depending on how your customer
plans to use the VPS: A) to answer all incoming calls, B) as an operator backup, or C) to
only answer calls not answered by user extensions.
Recommended outside (CO) line feature settings:
a)
If the KX-TVP50 is answering all incoming calls:
b)
If the KX-TVP50 is only answering calls not answered by the operator (Operator
Backup):
c)
If the KX-TVP50 is only answering calls not answered by user extensions:
INTEGRATING THE VPS WITH PANASONIC KX-T PHONE SYSTEMS
Outside (CO) Line Mode — Use System Programs [414](Day Mode), [415](Night
Mode), [416](Lunch Mode) to set this parameter. Program all lines DIL to the first
extension of the Voice Mail hunt group. The KX-TA series will allow incoming
outside calls to hunt only if the outside (CO) lines are DIL to the first port of the hunt
group. Lines programmed as Normal do not hunt.
Flexible Ringing Assignment — For each applicable outside (CO) line, use System
Programs [408](Day Mode), [409](Night Mode) and [410](Lunch Mode) to enable
ringing at the operator's extension(jack).
Delayed Ringing Assignment — To give the operator time to answer the call before
the VPS picks up, we recommend setting the delay to a few seconds for each
extension connected to the KX-TVP50. Use System Programs [411](Day Mode),
[412](Night Mode) and [413](Lunch Mode).
Outside (CO) Line Mode — Set the mode for each applicable outside (CO) line to
Normal. Use System Programs [414 ](Day Mode), [415](Night Mode) and
[416](Lunch Mode) to set this parameter.
Flexible Ringing Assignment — For each applicable outside (CO) line, use System
Programs [408](Day Mode), [409](Night Mode) and [410](Lunch Mode) to enable
ringing on every extension (jack) that you want to have ring.
Delayed Ringing Assignment — To give users time to answer the call before the
VPS picks up, we recommend setting the delay to a few seconds for each extension
connected to the KX-TVP50. Use System Programs [411](Day Mode), [412](Night
Mode) and [413](Lunch Mode).
Outside (CO) Line Mode — Set the mode for each applicable outside (CO) line to
Normal. Use System Programs [414](Day Mode), [415](Night Mode) and
[416](Lunch Mode) to set this parameter.
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
49