Panasonic KX-TVP50 Installation Manual page 128

7.2 UTILITY COMMANDS
will require several minutes to SAVE for all the data selected. When performing this operation,
always wait until the process completion indication appears.
WARNING
Never save (back-up) and upload the "Program" without your dealer's support.
The memory required to save each data component is indicated below.
1. Program - approximately 1 Mbytes (See Warning above)
2. Parameters - approximately 0.4 Mbytes (System Configuration)
3. System Prompts - approximately 5 Mbytes (Do not save - prompts are saved
as defaults in the flash memory)
Saving items 4-7 below will depend upon the length of the recorded messages.
4. User Prompts-1 (Modified prompts - Modifications to default settings)
5. User Prompts-2 (Modified prompts - Modifications to default settings)
6. Custom Service Menu (Customer service recordings)
7. Personal Greetings (Subscriber greetings)
Note
Before saving a file, we recommend that the Call Progression Mode of the VPS be turned off
by Typing [OFLN] and then pressing ENTER. This prevents data from changing while it is
being saved. (The system will not answer calls when off-line.)
1.
Type SAVE, then Press RETURN.
$ SAVE
VPS Flash Memory Data Save (VPS -> PC : Xmodem)
1: Program
2: Parameters
3: System Prompts
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menu
7. Personal Greetings
Select No. :=
2.
Select item to be backed up, then Press RETURN. The size of the file will be displayed.
To start press 'RETURN'
3.
Press RETURN.
- - - - - - SAVE Start!!
128
SYSTEM MAINTENANCE AND TROUBLESHOOTING