Saving The System Data To The Backup Device (Save) - Panasonic KX-TVP50 Installation Manual

SYSTEM ERROR: 2
SYSTEM ERROR: 3
SYSTEM ERROR: 4
SYSTEM ERROR: 5
SYSTEM ERROR: 6
SYSTEM ERROR: 7
SYSTEM ERROR: 8
SYSTEM ERROR: 9
SYSTEM ERROR: 10
SYSTEM ERROR: 11
SYSTEM ERROR: 12
SYSTEM ERROR: 13
SYSTEM ERROR: 14
No CO lines are active!!
COs are all disabled!!
APT(DPT) Interface Connection is not
Established.
Error and Warning Indications During System Operation
FLASH MEMORY STORAGE SPACE IS
NOW EXCEEDING
80%...
ASCII TERMINAL program Load Error

7.2.7 Saving the System Data to the Backup Device (SAVE)

All system programming data and voice prompts (7 functional areas) can be saved in separate
data files. To save this data, a data terminal must be connected to the RS-232C port of the VPS.
Files must be saved individually. The SAVE command must be executed for each data file. It
SYSTEM MAINTENANCE AND TROUBLESHOOTING
Indication
Table 27
Error loading of report data.
Clock error.
Mailbox data error.
Message data error (1).
Message data error (2).
Error loading of control data.
Error loading of voice prompt data.
Error loading of MWL control data.
Error loading of flash memory identify data.
Error writing of VBI chain data.
Error writing of BLK chain data.
Error loading of user prompt modify data.
Error loading of Class of Service data.
No Port cards present.
All Ports are malfunctioning.
Ports are malfunctioning for APT(DPT)
Integration because telephone lines are
disconnected or Integration with PBX is not set to
APT(DPT) Integration mode.
Table 28
80% or more of the Flash Memory voice
message save area is used.
Error loading of ASCII terminal control
program.
7.2 UTILITY COMMANDS
Meaning
127