Edit A Network Connection; Switch Control To Scu; Main Tab - Honeywell MX8 User Manual

Edit a Network Connection

Double tap the network name to edit the configuration or tap the network name and tap Connect to connect to the
network.
Network configuration screens are the same as displayed in the previous section.

Switch Control to SCU

1. To switch back to SCU control, select any other profile except ThirdPartyConfig in the SCU Active Config drop
down list on the Main tab panel.
2. A message appears that means a Power Cycle is required to make settings activate properly.
3. Tap OK.
4. Cold boot the MX8. Radio control is passed to the Summit Client Utility.

Main Tab

Setting
Admin Login
Radio
Active Config/Profile
Regulatory Domain
The Main tab displays information about the wireless client device including:
• SCU (Summit Client Utility) version.
• Driver version.
• Radio Type (BG is an 802.11 b/g radio, ABG is an 802.11 a/b/g radio).
• Regulatory Domain is preset to either Worldwide or a location specific domain (FCC, ETSI, KCC or TELEC).
• Copyright Information can be accessed by tapping the About SCU button.
• Active Config profile / Active Profile name.
• Status of the client (Down, Associated, Authenticated, etc.).
Default
SUMMIT
Enabled
Default
Varies by location
10 - 5