Device Unlocked / Device Locked; Notification Bar; Status Icons - Honeywell MX8 User Manual

Device Unlocked / Device Locked

When the MX8 is unlocked, clicking on Device unlocked locks the MX8.
When the MX8 is locked, clicking on Unlock at the bottom of the screen unlocks the MX8. Depending on the settings, a
password may be required. The MX8 can also be configured to lock after a period of inactivity.

Notification Bar

The Notification Bar is displayed at the top of the Today screen. The notification bar remains visible even when other
screens are selected, though the icons displayed may vary.
When the Notification bar is displayed on other screens there may be an X (close the current screen/program) or an ok
(accept the current input and close the screen).
Category Icon
Network
Volume
Power

Status Icons

Additional icons may be displayed at the lower edge of the Today screen.
Note: Summit signal strength icons are displayed only when the Summit Client Utility is controlling the radio.
Bluetooth module is connected to one or more of the targeted Bluetooth device(s).
MX8 is not connected to any Bluetooth device.
MX8 is ready to connect with any Bluetooth device.
MX8 is out of range of all paired Bluetooth device(s). Connection is inactive.
Summit radio is not currently associated or authenticated to an Access Point.
The signal strength for the currently associated/authenticated Access Point is -80 dBm or weaker.
The signal strength for the currently associated/authenticated Access Point is stronger than -80dBm but not
stronger than -60 dBm.
The signal strength for the currently associated/authenticated Access Point is stronger than -60 dBm but not
stronger than -40 dBm.
The signal strength for the currently associated/authenticated Access Point is stronger than -40 dBm.
5 - 4
Meaning
The Windows Mobile Wireless Manager is managing the wireless connection and the MX8
is connected to a wireless network.
The Summit Client Utility is managing the wireless connection
-or-
The Windows Mobile Wireless Manager is managing the wireless connection and the MX8
is not connected to a wireless network.
The Windows Mobile Wireless Manager is managing the wireless connection and has
detected one or more wireless networks in range.
The Windows Mobile Wireless Manager is managing the wireless connection and has not
detected a wireless network in range.
The speaker is on.
The speaker is off.
Vibrate is on.
The MX8 is connected to external power.
The MX8 is operating on battery power. The strength of the battery is indicated by the
number of bars displayed: 0 (low battery) to 4 (fully charged battery).