Honeywell MX8 User Manual page 182

UPCA- Advanced Properties
Transmit Check Character – When enabled, transmit the check character. Default is enabled
Transmit Number System Digit – When enabled, transmit the number system digit. Default is enabled.
Addenda
Read 2-Digit – When enabled, transmit the 2 digit addenda. Default is disabled.
Read 5-Digit – When enable, transmit the 5 digit addenda. Default is disabled.
Required – When enabled, only transmit bar codes with a 2 or 5 digit addenda. Default is disabled.
Insert Separator – When enabled, insert a space between the code and addenda. Default is enabled.
Note: An EAN 13 decoding algorithm will also decode UPCA labels. For correct operation, either disable the EAN
13 symbology when using UPCA labels or configure the EAN 13 settings to match the UPCA settings.
8 - 28