Bluetooth Devices Panel; Clear Button; Discover Button - Honeywell MX8 User Manual

Bluetooth Devices Panel

A device previously discovered and paired with the MX8 is shown in the Bluetooth Devices panel.
Note: When an active paired device, not the MX8, enters Suspend Mode, is turned Off or leaves the MX8 Bluetooth scanning
range (approximately 32 feet or 10 meters), the Bluetooth connection between the paired device and the MX8 is lost.
There may be audible or visual signals as paired devices disconnect from the MX8.
The discovered paired devices may or may not be identified with an icon. Discovered devices without an icon can be paired; the
Bluetooth panel assigns an icon to the device name.
An icon with a red background indicates the device's Bluetooth connection is inactive.
An icon with a white background indicates the device is connected to the MX8 and the device's Bluetooth connection is active.
Doubletap a device in the list to open the device properties menu. The target device does not need to be active.

Clear Button

Deletes all devices from the Device table that are not currently paired. A dialog box is presented, "Delete all disconnected
devices? Yes/No". Tap the Yes button to remove disconnected or deleted devices from the device table. The devices are
removed from the Device table after any reboot sequence and when EZPair is re-launched without a reboot sequence. Tap
the No button to make no changes.

Discover Button

Note: Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth MX8 default name is
determined by the factory installed software version. Best practice indicates assigning every MX8 a unique name (up
to 32 characters) before Bluetooth Discovery is initiated.
7 - 3