Ctrl Char Mapping - Honeywell MX8 User Manual

Option
Lights

Ctrl Char Mapping

The Ctrl Char Mapping button activates a dialog to define the operations the Data Collection Wedge performs on
control characters (values less than 0x20) embedded in bar codes. Control characters can be replaced with user-
defined text which can include hat encoded or hex encoded values. In key message mode, control characters can also
be translated to their control code equivalent key sequences.
8 - 32
Action
Specifies if the imager's lights and aimer should be left on during the entire decode process.
The default is disabled.
If disabled, the lights are turned on only during image capture, then turned off while the imager at-
tempts to process and decode the bar code.
If enabled, the aimer and lights remain turned on during the entire process.
In Aggressive Linear Decode mode, set this parameter to enabled to improve the aimer visibility. See
"Mode" above.