Mx8 Without Label - Honeywell MX8 User Manual

1. Scan the Bluetooth address bar code label, attached to the MX8, with the Bluetooth mobile scanner.
2. If this is the first time the Bluetooth scanner has scanned the MX8 Bluetooth label, the devices are paired. If the devices
do not pair successfully, go to the next step.
3. Open the EZPair panel.
4. Tap Discover. Locate the Bluetooth scanner in the Discovery panel.
5. Doubletap the Bluetooth scanner until the right-mouse-click menu appears.
6. Select Pair as Scanner to pair the MX8 with the Bluetooth mobile scanner.
The devices are paired. The Bluetooth bar code reader responds with a series of beeps and LED flashes.
After scanning the MX8 Bluetooth label, if there is no beep and no LED flash from the Bluetooth device, the devices are
currently paired.

MX8 without Label

If the MX8 Bluetooth address bar code label does not exist, follow these steps to create a unique Bluetooth address bar
code for the MX8:
1. First, locate the MX8 Bluetooth address on the About tab.
2. Next, create a Bluetooth address bar code label for the MX8. Free bar code creation software is available for download
on the world wide web. Search using the keywords "bar code create".
The format for the bar code label is as follows:
• Bar code type must be Code 128.
• FNC3 character followed by string Uppercase L, lowercase n, lowercase k, uppercase B and then the Bluetooth
address (12 hex digits, no colons). For example, LnkB0400fd002031.
3. Create and print the label.
4. Scan the MX8 Bluetooth address bar code label with the mobile Bluetooth bar code reader.
The devices are paired. The Bluetooth bar code reader responds with a series of beeps and LED flashes. Refer to the
following section titled
there is no beep and no LED flash from the mobile Bluetooth device, the devices are currently paired.
7 - 12
Bluetooth Reader Beep and LED Indications (page 7-13). After scanning the MX8 Bluetooth label, if