About Panel - Honeywell MX8 User Manual

Auto Reconnect on Boot
This option is Enabled (checked) by default. All previously paired devices are reconnected upon any reboot sequence.
When disabled (unchecked), no devices are reconnected upon any reboot sequence.
Auto Reconnect
This option is Enabled (checked) by default. This option controls the overall mobile Bluetooth device reconnect behavior.
When Auto Reconnect is disabled (unchecked), Auto Reconnect on Boot is automatically disabled and dimmed.
When Auto Reconnect is disabled (unchecked), no devices are reconnected in any situation. The status of Auto Reconnect
on Boot is ignored and no devices are reconnected on boot. The status of Clear Pairing Table on Boot controls whether the
pairing table is populated on boot.
When Auto Reconnect is enabled (checked) and Auto Reconnect on Boot is disabled (unchecked), devices are not
reconnected on boot, but are reconnected in other situations (example: return from out-of-range).
When Auto Reconnect is enabled (checked) and Clear Pairing Table on Boot is enabled (checked), devices are not
reconnected on boot, but are reconnected in other situations (example: return from out-of-range). The pairing table is
cleared on boot. The status of Auto Reconnect on Boot is ignored and the option is automatically disabled (unchecked) and
dimmed.

About Panel

This panel lists the assigned Computer Friendly Name (that other Bluetooth devices may discover during their Discovery and
Query process), the Bluetooth device MAC address, and software version levels. The data cannot be edited by the user.
7 - 10