Reboot; Warm Boot; Cold Boot - Honeywell MX8 User Manual

Reboot

When the Windows desktop/Today screen is displayed or an application begins, the power up (or reboot) sequence is complete.

Warm Boot

Hold down the Power key and then the Enter key until the screen blanks. Release the keys and the MX8 warm boots.
Or, using the input panel,
Tap Start > Run and type WARMBOOT.EXE or WARMBOOT. This command is not case sensitive. Tap the OK button. This
process takes less than 15 seconds. Temporary data not saved is lost.
Note: There may be slight delays while the wireless client connects to the network, re-authorization for voice-enabled
applications completes, Wavelink Avalanche management of the MX8 startup completes, or Bluetooth relationships
establish or re-establish.

Cold Boot

Temporary data not saved is lost. All programs are re-launched. Previously saved user settings are restored. Cold boot is
also called cold reset.
Hold down the Blue key, the Scan key and the Power key until the screen blanks. Release the keys and the MX8 cold boots.
or
Tap Start > Run and, using the virtual keyboard or SIP, type COLDBOOT. Tap the OK button and the MX8 cold boots.
This command is not case-sensitive.
There may be small delays while the wireless client connects to the network, authorization for Voxware-enabled
applications complete, Wavelink Avalanche management of the MX8 startup completes, and Bluetooth relationships
establish or re-establish.
2 - 19