Reconnect Panel; Options - Honeywell MX8 User Manual

With microsoft windows mobile 6.1
Hide thumbs Also See for MX8:
Table of Contents

Advertisement

Reconnect Panel

Note: These options can still be checked or unchecked whether Bluetooth connection is enabled or disabled.

Options

Report when connection lost
This option is Enabled (checked) by default.
There may be an audio or visual signal when a connection between a paired, active device is lost.
A visual signal may be a dialog box placed on the display notifying the user the connection between one (or all) of the
paired Bluetooth devices has stopped. Tap the ok button to remove the dialog box from the screen.
Report when reconnected
This option is Disabled (unchecked) by default.
There may be an audio or visual signal when a connection between a paired, active device is made.
A visual signal may be a dialog box placed on the display notifying the user the connection between one (or all) of the
paired Bluetooth devices has resumed. Tap the ok button to remove the dialog box from the screen.
Report failure to reconnect
This option is Enabled (checked) by default.
The default time delay is 30 minutes. This value cannot be changed by the user.
There may be an audio or visual signal when a connection between a paired, active device fails to re-connect. A visual
signal may be a dialog box placed on the display notifying the user the connection between one (or all) of the previously
paired Bluetooth devices has failed.
Tap the X button or ok button to close the dialog box.
Possible reasons for failure to reconnect: Timeout expired without reconnecting; attempted to pair with a device that is
currently paired with another device; attempted to pair with a known device that moved out of range or was turned off;
attempted to pair with a known device but the reason why reconnect failed is unknown.
Clear Pairing Table on Boot
This option is Disabled (unchecked) by default.
When enabled (checked), all previous paired information is deleted upon any reboot sequence and no devices are
reconnected.
When enabled (checked) Auto Reconnect on Boot is automatically disabled (dimmed).
7 - 9

Advertisement

Table of Contents
loading

Table of Contents