Edit A Network Connection; Switch Control To Scu - Honeywell MX8 Reference Manual

Please refer to the Windows Mobile help screens or online documentation for configuring wireless security using the Windows
Mobile Wireless Manager.
Note: Tap Start > Help for context sensitive Windows Help when changing or viewing options. Tap the X icon in the top right
corner to close Windows Help.

Edit a Network Connection

Double tap the network name to edit the configuration or tap the network name and tap Connect to connect to the network.
Network configuration screens are the same as displayed in the previous section.

Switch Control to SCU

1. To switch back to SCU control, select any other profile except ThirdPartyConfig in the SCU Active Config drop down
list on the Main tab.
2. A message appears that means a Power Cycle is required to make settings activate properly.
3. Tap OK.
4. Cold boot the MX8.
Radio control is passed to the Summit Client Utility.
7-6