Adjust Headset / Microphone And Secure Cable; Accessing Files On The Cf/Sd Card - Honeywell MX8 User Manual

Adjust Headset / Microphone and Secure Cable

The headset consists of an earpiece, a microphone, a clothing clip and a cable. The headset attaches to the audio cable end of
the voice cable which attaches to the MX8.
Align the audio connector and the headset quick connect cable end. Firmly push the cable ends together until they click and lock
in place.
Do not twist the microphone boom when adjusting the microphone. The microphone should be adjusted to be about two finger
widths from your mouth.
Make sure the microphone is pointed at your mouth. Note the small "Talk" label near the mouthpiece. Make sure the Talk label is
in front of your mouth. The microphone cable can be routed over or under clothing.
Under Clothing
• Leave the cable exposed only at the top of the collar.
• Be sure to leave a small loop of cable to allow movement of your head.
Over Clothing
• Use clothing clips to hold the cable close to your body.
• Tuck the cable under the belt, but leave a small loop where it goes under the belt.
• Do not wear the cable on the front of your body. It may get in your way or get caught on protruding objects.

Accessing Files on the CF/SD Card

Tap the My Device icon on the Desktop then click the System icon. The SD/CF card is used for permanent storage of the MX8
drivers, CAB files and utilities. It is also used for registry content back up. CAB files, when executed, are not deleted.
Always perform a warm reset (Start / Run / Warmboot) when exchanging one flash (CF/SD) card for another.
2 - 25