Initial Setup For The Mx8; Hardware Setup; Software Setup - Honeywell MX8 User Manual

Initial Setup for the MX8

Following are steps you might take when setting up a new MX8. Follow the links for further instruction for each step. Contact
Technical Assistance (page 15-1) if you need additional help.
Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work
surface, the MX8 and components from static discharge.

Hardware Setup

1. Connect accessories e.g., hand strap (if necessary), trigger handle, etc.
2. Provide a power source:
• Insert a fully charged main battery.
• Connect a power cable (USB/Power or Serial/Power).
• Place the MX8 in a powered Desktop Cradle or Multi-dock.
3. Press the Power key.

Software Setup

Hardware setup should be completed before starting software setup.
1. Calibrate Touch screen.
2. Set Date and Time Zone.
3. Set Power Timers.
4. Set Speaker Volume.
5. Pair Bluetooth devices.
6. Assign Mappable Keys.
7. Setup Wireless client parameters.
8. Setup terminal emulation parameters.
9. Save changed settings to the registry.
10. Set AppLock parameters.
11. Set DCWedge parameters.
2 - 2