Profile Tab; Buttons - Honeywell MX8 User Manual

Profile Tab

Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the panel is exited before tapping
the Commit button, changes are not saved!
Setting
Profile Default
SSID Blank
Client Name Blank
Power Save Fast
Tx Power Maximum
Bit Rate Auto
Radio Mode See
Auth Type Open
EAP Type None
Encryption None
When logged in as an Admin use the Profile tab to manage profiles. When not logged in as an Admin, the parameters can
be viewed, and cannot be changed. The buttons on this tab are dimmed if the user is not logged in as Admin. The Profile
tab was previously labeled Config.

Buttons

Commit Button
Saves the profile settings made on this screen. Settings are saved in the profile.
Credentials Button
Allows entry of a username and password, certificate names, and other information required to authenticate with the
access point. The information required depends on the EAP type.
Delete Button
Deletes the profile. The current active profile cannot be deleted and an error message is displayed if a delete is
attempted.
10 - 8
Default
Profile Parameters (page 10-9) for default