Bluetooth Reader Beep And Led Indications; Bluetooth Remote Device Beep Type; Bluetooth Remote Device Led; Bluetooth Printer Setup - Honeywell MX8 User Manual

Bluetooth Reader Beep and LED Indications

Bluetooth Remote Device Beep Type

Beep Type from Mobile Bluetooth Device
Acknowledge label
Label rejected
Transmission error
Link successful
Link unsuccessful

Bluetooth Remote Device LED

LED on Mobile Bluetooth Device
Yellow LED blinks at 2 Hz
Off
Yellow LED blinks at 50 Hz
Yellow LED blinks at the same rate as the paging beep (1 Hz)
Green LED blinks once a second
Upon startup, if the mobile Bluetooth device sounds a long tone, this means the device has not passed its automatic
Selftest and has entered isolation mode. If the device is reset, the sequence is repeated. Contact
(page 15-1) for help with a Bluetooth device.

Bluetooth Printer Setup

The Bluetooth managed printer should be as close as possible, in direct line of sight, with the MX8 during the pairing process.
1. Open the EZPair Panel (Start > Settings > System > Bluetooth or tap the Bluetooth icon on the Today screen).
2. Tap Discover. Locate the Bluetooth printer in the Discovery panel.
3. Tap and hold the stylus (or doubletap) on the Bluetooth printer until the right-mouse-click menu appears.
4. Select Pair as Printer to pair the MX8 with the Bluetooth managed printer.
The devices are paired. The Bluetooth managed printer may respond with a series of beeps or LED flashes.
Refer to the Bluetooth managed printer manufacturer's User Guide; it may be available on the manufacturer's web site.
If there is no beep or no LED flash from the Bluetooth managed printer, the MX8 and the Bluetooth managed printer are cur-
rently paired.
Beep Pattern
1 beep
2 beeps at low frequency
Beep will sound high-low-high-low
Beep will sound low-medium-high
Beep will sound high-low-high-low
Behavior
Linking in progress
Disconnected or unlinked
Bluetooth transmission in progress
Paging
Disabled indication
Technical Assistance
7 - 13