Cradles And Multi-Dock; Technical Specifications - Desktop Cradle; Pinout - Rs232 Connector - Honeywell MX8 User Manual

Cradles and Multi-dock

Technical Specifications – Desktop Cradle
Note: Do not store MX8 batteries above 140°F (60°C) for extended periods.
Weight
Dimensions
Temperature
Operating
Charging
Storage
Humidity
IEC 60529
Ports

Pinout - RS232 Connector

Note: Tethered scanners must be connected to powered cradles.
The connector is industry-standard RS232 and is a PC/AT standard 9-pin D male connector.
Pin Signal
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI or Power
Note: Pin 9 of this port is connected to +5 VDC. Only approved cables are to be used for communication between the
cradle and external devices.
14 - 4
18 oz / 500 grams
H 3.6 in x W 4.3 in; x L 7.5 in
32° F to 122° F / 0° C to 50° C (charger On, no charging in progress)
50° F to 104° F / 10° C to 40° C(spare battery charger is charging)
-4° F to 158° F / -20° C to 70° C
5% to 90% (non-condensing) at 104° F / 40° C
Compliant to IP40
Power, MX8 I/O and serial port
Description
Data Carrier Detect
Received Data – Input
Transmitted Data – Output
Data Terminal Ready
Signal/Power Ground
Data Set Ready
Request to Send
Clear To Send
+5 VDC sourced by the Cradle