Connecting To Bluetooth Devices; Taskbar Bluetooth Indicator - Honeywell MX7 Tecton User Manual

Connecting to Bluetooth Devices

Before connecting to Bluetooth Devices:
• The system administrator, using the options on the EZPair (or LXEZ Pairing) control panel has discovered, paired, connected
and disconnected Bluetooth devices for the MX7 Tecton.
• The system administrator has enabled and disabled EZPair (or LXEZ Pairing) parameters for the MX7 Tecton.
• The system administrator has also assigned a Computer Friendly Name using the EZPair (or LXEZ Pairing) control panel for
the MX7 Tecton.
To connect Bluetooth devices, the MX7 Tecton should be as close as possible and in direct line of sight (distances up to 32.8
feet or 10 meters) with the targeted Bluetooth device during the discovery and pairing process.
If the Bluetooth devices are in Suspend, tap the power key to wake the MX7 Tecton.
Using the correct procedure, wake the targeted Bluetooth device if necessary.
There may be audible or visual signals as both devices discover and pair with each other.

Taskbar Bluetooth Indicator

MX7 Tecton is connected to one or more of the targeted Bluetooth device(s).
MX7 Tecton is not connected to any Bluetooth device.
MX7 Tecton is ready to connect with any Bluetooth device.
MX7 Tecton is out of range of all paired Bluetooth device(s). Connection is inactive.
There may be audible or visual signals from paired devices as they move back into range and re-connect with the Bluetooth
client in the MX7 Tecton.
2 - 16