Table of Contents
Advertisement
Solution 64 | Installer Guide | System Programming
System > Commands >
Template Default
This command allows the installer to download pre-
configured templates set up by the Installer on the MyAlarm
web interface. The installer can configure up to 4 separate
templates.
This feature will be available 2nd QTR 2005.
System > Commands >
Service Mode
This command allows the installer to put the panel into service
mode before performing system maintenance or upgrades.
When in service mode, the following functions are disabled. By
default, service mode will automatically terminate after 2 hours
if not terminated sooner by the installer.
Zone Tamper
Alarm Outputs
Dialler
Panel Tamper
Press [MENU] + [7] + [0] + [8]. The keypad will display the
1)
current service mode status.
Service Mode
Service Mode is OFF
To turn ON, Press ON
Press OK or MENU
2)
To turn service mode on, press [ON], or press [OFF] to turn
service mode off.
3)
Press [OK] or [MENU] to exit when finished.
i
Service mode will automatically exit after 2 hours if set to do so
in MENU 7-7-4 — Installer Options.
Note
S ystem Clo c k
System > Clock >
Set Date & Time
This menu allows you to set or adjust the panels internal clock.
1)
Press [MENU] + [7] + [1] + [0]. The keypad will display the
current date and time.
Set Date And Time
01-Jan-2004 04:37am
Press OK to SAVE
Use the left, right, up and down arrow keys to set the day,
2)
month, year, hour and minute. Use left and right keys to scroll
the cursor left and right to between the month, day, year, hour
and minute.
11-4
MENU 7-0-5
MENU 7-0-8
-
MENU 7-1-0
When the time is set correctly press [OK] to save and exit or
3)
press [MENU] to exit without saving.
System > Clock >
Summertime On
-
-
At 2:00am
Month
This menu allows you to program when day light savings start
during the year. This will allow the panel to automatically
adjust it's built in clock accordingly. In Australia, daylight
savings moves forward one hour at 2:00 am on the last Sunday
of October.
To program Summertime On, you will need to set the month
of the year (Jan to Dec), the week of the month (1 to 5) and the
day of the week (Sun to Sat) that daylight savings starts.
(*** System Wide Parameter ***)
1)
Press [MENU] + [7] + [1] + [1]. The keypad will display the
current Summertime on.
Summertime On
Month Week Day
---
---
Press OK to SAVE
2)
Use the up and down arrow keys to toggle the month, week
and year. Use the left and right keys to move the cursor
between the month, week and year.
3)
When finished press [OK] to save and exit or press [MENU] to
exit without saving.
System > Clock >
Summertime Off
-
-
At 2:00am
Month
This menu allows you to program when day light savings end
during the year. This will allow the panel to automatically
adjust it's built in clock accordingly. In Australia, daylight
savings moves backwards one hour at 3:00 am on the last
Sunday of March.
To program Summertime Off, you will need to program the
month of the year (Jan to Dec), the week of the month (1 to 5)
and the day of the week (Sun to Sat) that daylight saving ends.
(*** System Wide Parameter ***)
1)
Press [MENU] + [7] + [1] + [2]. The keypad will display the
current Summertime off.
Summertime Off
Month Week Day
---
---
Press OK to SAVE
2)
Use the up and down arrow keys to toggle the month, week
and year. Use the left and right keys to move the cursor
between the month, week and year.
MENU 7-1-1
-
-
-
-
-
Week
---
MENU 7-1-2
-
-
-
-
-
Week
---
Bosch Security Systems | 11/05 | BLCC110I
-
-
Day
-
-
Day
- Quick Links:
- Wiring Diagrams
Hide quick links:
Advertisement
Table of Contents
