Table of Contents
Advertisement
Solution 64 | Installer Guide | Device Programming
The status line will scroll the keypad voltage, temperature and
2)
home area while the keypad type and firmware version
number are continuously displayed.
Use the up and down arrow keys to select the output expander
3)
that you want to view, then press [OK] to select. Alternatively,
you can enter the expander number, then press [OK].
OutputX 001 Ox001
OutputX Version 1.00
Temperature = 26˚C
Press OK or MENU
3)
Press [OK] or [MENU] to exit.
i
To view the current condition of an individual output either on
the main panel or on the CM110 Output Expander use
MENU 4-0-0 — Output Status.
Note
Devices > Commands >
P / Supply Status
Reserved for future use
Devices > Commands >
GSM Status
Reserved for future use
Devices > Commands >
Ethernet Status
Reserved for future use
Devices > Commands >
Access Status
Reserved for future use
Devices > Commands >
X10 Status
Reserved for future use
K ey pa d O pti on s
Devices > Keypads >
Keypad Volume
This menu allows you to adjust the volume of the keypad's
speaker to suit the application or customer preference. Each
keypad on the system can be adjusted separately.
1)
Press [MENU] + [6] + [1] + [0] and use the up and down arrows
to highlight the keypad in the list then press [OK].
Alternatively, you can enter the keypad number directly and
press [OK].
10-2
-
-
MENU 6-0-4
-
-
MENU 6-0-5
-
-
MENU 6-0-6
-
-
MENU 6-0-7
-
-
MENU 6-0-8
-
MENU 6-1-0
Keypad 001 Volume
L
Press
2)
Use the arrow keys to set the required volume level. Each time
a key is pressed, you will hear a beep indicating the new
volume level. When finished press [OK].
i
To completely silence the keypad speaker, simply move the slider
all the way to the left. This will disable the keypad speaker for all
functions including key press beeps.
Note
Devices > Keypads >
Keypad Contrast
This menu allows you to adjust the contrast of the keypad's
LCD display to suit the application or customer preference.
Each keypad on the system can be adjusted separately.
1)
Press [MENU] + [6] + [1] + [1] and use the up and down arrows
to highlight the keypad in the list then press [OK].
Alternatively, you can enter the keypad number directly and
press [OK].
Keypad 001 Contrast
L
Press
Use the arrow keys to set the required contrast level. Each time
2)
a key is pressed the contrast will adjust to the new level. When
finished press [OK].
Devices > Keypads >
Keypad Backlight
This menu allows you to adjust the brightness of the backlight
on the keypad's LCD display. Each keypad can be adjusted
separately to suit the customers needs.
1)
Press [MENU] + [6] + [1] + [2] and use the up and down arrows
to highlight the keypad in the list then press [OK].
Alternatively, you can enter the keypad number directly and
press [OK].
Keypad 001 Backlight
L
Press
Use the arrow keys to set the required backlight level. Each
2)
time a key is pressed the backlight will adjust to the new level.
When finished press [OK].
H
OK to
SAVE
-
MENU 6-1-1
H
OK to
SAVE
-
MENU 6-1-2
H
OK to
SAVE
Bosch Security Systems | 11/05 | BLCC110I
- Quick Links:
- Wiring Diagrams
Hide quick links:
Advertisement
Table of Contents
