Removing The Primary Sheave; Removing The Secondary Sheave - Yamaha 2010 XMAX YP125R Service Manual

EAS24620

REMOVING THE PRIMARY SHEAVE

1. Remove:
• V-belt case
TIP
Loosen each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern. After all of the
bolts are fully loosened, remove them.
2. Remove:
• Primary sheave nut "1"
• Washer
• Primary fixed sheave "2"
TIP
While holding the primary fixed sheave with the
rotor holding tool "3", loosen the primary sheave
nut.
Rotor holding tool
90890-01235
Universal magneto & rotor holder
YU-01235
EAS24630

REMOVING THE SECONDARY SHEAVE

1. Remove:
• Secondary sheave nut "1"
• Spacer
• Clutch housing "2"
TIP
While holding the clutch housing with the sheave
holder "3", loosen the secondary sheave nut.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
V-BELT AUTOMATIC TRANSMISSION (YP250R)
5-93
2. Loosen:
• Clutch carrier nut "1"
ECA13860
NOTICE
Do not remove the clutch carrier nut at this
stage.
TIP
While holding the clutch carrier with the sheave
holder "2", loosen the clutch carrier nut one full
turn with the locknut wrench "3".
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
Locknut wrench
90890-01348
YM-01348
3
1
3. Remove:
• Secondary sheave assembly "1"
• V-belt "2"
TIP
Remove the V-belt and secondary sheave as-
sembly from the primary sheave side.
2