Removing The Transmission; Checking The Transmission; Installing The Transmission - Yamaha 2010 XMAX YP125R Service Manual

EAS26250

REMOVING THE TRANSMISSION

1. Remove:
• Transmission case cover
TIP
Loosen each bolt 1/4 of a turn at a time, in stag-
es and in a crisscross pattern. After all of the
bolts are fully loosened, remove them.
EAS26300

CHECKING THE TRANSMISSION

1. Check:
• Transmission gears
Blue discoloration/pitting/wear → Replace
the defective gear(s).
• Transmission gear dogs
Cracks/damage/rounded edges → Replace
the defective gear(s).
2. Check:
• Transmission gear engagement
(each pinion gear to its respective wheel
gear)
Incorrect → Reassemble the transmission
axle assemblies.
3. Check:
• Transmission gear movement
Rough movement → Replace the defective
part(s).
EAS37P1066

INSTALLING THE TRANSMISSION

1. Install:
• Oil seal "1"
• Oil seal "2"
Oil seal installed depth
0–0.5 mm (0–0.020 in)
1
a
a. Oil seal installed depth
a
2
5-114
TRANSMISSION (YP250R)