Changing The Engine Oil - Yamaha 2010 XMAX YP125R Service Manual

TIP
• Before checking the engine oil level, wait a few
minutes until the oil has settled.
• Do not screw the dipstick in when inspecting
the oil level.
Type
SAE 10W-30, SAE 10W-40, SAE
15W-40, SAE 20W-40 or SAE
20W-50
Recommended engine oil grade
API service SF, SG type or high-
er, JASO standard MA
0 10 30 50 70 90 110
SAE 10W-30
SAE 10W-40
SAE 10W-50
SAE 15W-40
–20 –10 0
EWA37P1003
NOTICE
Do not allow foreign materials to enter the
crankcase.
1
b
a
5. Start the engine, warm it up for several min-
utes, and then turn it off.
6. Check the engine oil level again.
TIP
Before checking the engine oil level, wait a few
minutes until the oil has settled.
7. Install:
• Dipstick
130 ˚F
SAE 20W-40
SAE 20W-50
10 20 30 40 50 ˚C
1
EAS20780

CHANGING THE ENGINE OIL

1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
• Engine oil filler cap "1"
• Engine oil drain bolt "2"
(along with the gasket)
4. Drain:
• Engine oil
(completely from the crankcase)
5. If the oil strainer is also to be cleaned, per-
form the following procedure.
M MMM M MMM M M MMM
a. Remove the oil strainer cover "1" and oil
strainer "2".
b. Install a new O-ring "3".
2
3
New
1
c. Install the oil strainer cover.
3-27
ENGINE (YP250R)
1
M M MMM M M MMM M
2
M MMM M MMM