Installing The V-Belt - Yamaha 2010 XMAX YP125R Service Manual

Clutch spring holder
90890-01337
Clutch spring holder arm
90890-01464
2
2
a
EAS24740

INSTALLING THE V-BELT

1. Install:
• V-belt "1"
• Secondary sheave assembly "2"
ECA37P1011
NOTICE
Do not allow grease to come in contact with
the V-belt or secondary sheave assembly.
TIP
• Install the V-belt with the printed arrow mark on
the V-belt facing in the direction shown in the il-
lustration.
• Install the V-belt onto the primary sheave side.
1
2
2. Tighten:
• Clutch carrier nut "1"
V-BELT AUTOMATIC TRANSMISSION (YP250R)
5-97
Clutch carrier nut
90 Nm (9.0 m·kgf, 65 ft·lbf)
TIP
While holding the clutch carrier with the sheave
holder "2", tighten the clutch carrier nut with the
locknut wrench "3".
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
Locknut wrench
90890-01348
YM-01348
3
1
3. Install:
• Clutch housing "1"
• Spacer
• Secondary sheave nut "2"
Secondary sheave nut
60 Nm (6.0 m·kgf, 43 ft·lbf)
TIP
While holding the clutch housing with the sheave
holder "3", tighten the secondary sheave nut.
Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
2