2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-19.
OK ↓
Replace the meter assembly.
The V-belt replacement indicator fails to come on.
1. Check the V-belt replacement indi-
cator reset coupler.
Refer to "CHECKING THE V-BELT
REPLACEMENT INDICATOR RE-
SET COUPLER" on page 8-90.
OK ↓
2. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-19.
OK ↓
Replace the meter assembly.
The engine oil change indicator fails to come on.
1. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-19.
OK ↓
Replace the meter assembly.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the V-belt replacement indicator
reset coupler.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Properly connect or repair the signaling
system wiring.
8-25
SIGNALING SYSTEM