Checking The Rear Brake Pads (Yp250R); Checking The Front Brake Hose; Checking The Rear Brake Hose; Bleeding The Hydraulic Brake System - Yamaha 2010 XMAX YP125R Service Manual

EAS21260
CHECKING THE REAR BRAKE PADS
(YP250R)
The following procedure applies to all of the
brake pads.
1. Operate the brake.
2. Check:
• Rear brake pad
Wear indicator groove "a" has almost disap-
peared → Replace the brake pads as a set.
Refer to "REAR BRAKE" on page 4-29.
a
a
EAS21270

CHECKING THE FRONT BRAKE HOSE

1. Check:
• Brake hose "1"
Cracks/damage/wear → Replace.
1
2. Hold the vehicle upright and apply the front
brake several times.
3. Check:
• Brake hose
Brake fluid leakage → Replace the damaged
hose.
Refer to "FRONT BRAKE" on page 4-17.
EAS21290

CHECKING THE REAR BRAKE HOSE

1. Check:
• Brake hose "1"
Cracks/damage/wear → Replace.
a
2. Check:
• Brake hose holder "2"
Loose connection → Connect.
A
B
A. YP125R
B. YP250R
3. Hold the vehicle upright and apply the rear
brake several times.
4. Check:
• Brake hose
Brake fluid leakage → Replace the damaged
hose.
Refer to "REAR BRAKE" on page 4-29.
EAS21350
BLEEDING THE HYDRAULIC BRAKE
SYSTEM
EWA37P1005
WARNING
Bleed the hydraulic brake system whenever:
• The system is disassembled.
• A brake hose is loosened, disconnected or
replaced.
• The brake fluid level is very low.
• The brake operation is faulty.
TIP
• Be careful not to spill any brake fluid or allow
the brake master cylinder reservoir to overflow.
3-36
CHASSIS
1
2
1
2