Periodic Maintenance Chart For The Emission Control System (Yp250R); General Maintenance And Lubrication Chart (Yp250R) - Yamaha 2010 XMAX YP125R Service Manual

EAS37P1070
TIP
• Engine air filter and V-belt air filter
• This model's engine air filter is equipped with a disposable oil-coated paper element, which must not
be cleaned with compressed air to avoid damaging it.
• The engine air filter element needs to be replaced and the V-belt air filter element needs to be ser-
viced more frequently when riding in unusually wet or dusty areas.
• Hydraulic brake service
• After disassembling the brake master cylinders and calipers, always change the fluid. Regularly
check the brake fluid levels and fill the reservoirs as required.
• Every two years replace the internal components of the brake master cylinders and calipers, and
change the brake fluid.
• Replace the brake hoses every four years and if cracked or damaged.
EAU46910

PERIODIC MAINTENANCE CHART FOR THE EMISSION CONTROL SYSTEM (YP250R)

TIP
• The annual checks must be performed every year, except if a kilometer-based maintenance,
or for the UK, a milage-based maintenance, is performed instead.
• From 50000 km (30000 mi), repeat the maintenance intervals starting from 10000 km (6000 mi).
• Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools,
data and technical skills.
NO. ITEM
1 * Fuel line
2 Spark plug
3 * Valves
4 * Fuel injection
5 * Muffler and ex-
haust pipe
EAU1770C

GENERAL MAINTENANCE AND LUBRICATION CHART (YP250R)

TIP
• The annual checks must be performed every year, except if a kilometer-based maintenance,
or for the UK, a milage-based maintenance is performed instead.
• From 50000 km (30000 mi), repeat the maintenance intervals starting from 10000 km (6000 mi).
• Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools,
data and technical skills.
NO. ITEM
1 Air filter element
V-belt case air fil-
2
ter element
CHECK OR MAINTENANCE
JOB
• Check fuel hoses for cracks or
damage.
• Check condition.
• Clean and regap.
• Replace.
• Check valve clearance.
• Adjust.
• Check engine idle speed.
• Check the screw clamp(s) for
looseness.
CHECK OR MAINTENANCE
JOB
• Replace.
• Clean.
PERIODIC MAINTENANCE
ODOMETER READING
1000 km 10000 km 20000 km
(600 mi) (6000 mi) (12000 mi)
√
√
√ √
√ √
ODOMETER READING
1000 km 10000 km 20000 km
(600 mi) (6000 mi) (12000 mi)
√
3-3
30000 km 40000 km
(18000 mi) (24000 mi)
√ √ √
√
√ √
√ √
√ √ √
√ √ √
30000 km 40000 km
(18000 mi) (24000 mi)
√ √
√ √ √
ANNUAL
CHECK
√
√
ANNUAL
CHECK