Yamaha 2010 XMAX YP125R Service Manual page 288

Sheave holder
90890-01701
Primary clutch holder
YS-01880-A
3
3. Apply:
• Sealant
(onto the crankshaft position sensor/stator
assembly lead grommet)
Yamaha bond No. 1215
90890-85505
(Three Bond No.1215®)
4. Install:
• Oil seal "1" New
Oil seal installed depth
4.5–5.4 mm (0.18–0.21 in)
1
New
a. Oil seal installed depth
5. Install:
• Generator cover
STARTER CLUTCH AND GENERATOR (YP125R)
1
2
a
Generator cover bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
TIP
Tighten the generator cover bolts in stages and
in a crisscross pattern.
5-43