1. Seat lock cable
2. Wire harness
3. Ignition coil lead
4. Spark plug cap
5. Coolant temperature sensor lead
6. O
sensor
2
7. Starter motor lead
8. Rear brake hose
A. Fasten the wire harness, starter motor lead,
crankshaft position sensor/stator assembly lead,
and O
sensor lead with a plastic locking tie.
2
B. Point the end of the plastic locking tie to the right,
and then cut off the excess end of the tie to 0
–
mm (0
0.20 in).
CABLE ROUTING (YP250R)
–
5
2-82