Electrical System; Checking And Charging The Battery; Checking The Fuses; Replacing A Headlight Bulb - Yamaha 2010 XMAX YP125R Service Manual

EAS21750

ELECTRICAL SYSTEM

EAS21760

CHECKING AND CHARGING THE BATTERY

Refer to "ELECTRICAL COMPONENTS" on
page 8-71.
EAS21770

CHECKING THE FUSES

Refer to "ELECTRICAL COMPONENTS" on
page 8-71.
EAS21780

REPLACING A HEADLIGHT BULB

To replace a high beam headlight bulb
1. Remove:
• Front cowling assembly
Refer to "GENERAL CHASSIS" on page 4-1.
2. Remove:
• Headlight bulb cover "1"
1
3. Remove:
• Headlight bulb holder "1"
(with the headlight bulb)
4. Remove:
• Headlight bulb
EWA13320
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
5. Install:
ECA13690
NOTICE
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
6. Install:
7. Install:
8. Install:
To replace a low beam headlight bulb
1. Remove:
2. Remove:
3. Disconnect:
1
4. Detach:
5. Remove:
EWA13320
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
3-43
ELECTRICAL SYSTEM
• Headlight bulb New
Secure the new headlight bulb with the head-
light bulb holder.
• Headlight bulb holder
(with the headlight bulb)
• Headlight bulb cover
• Front cowling assembly
Refer to "GENERAL CHASSIS" on page 4-1.
• Front cowling assembly
Refer to "GENERAL CHASSIS" on page 4-1.
• Headlight bulb cover "1"
• Headlight coupler "1"
• Headlight bulb holder "2"
• Headlight bulb "3"
WARNING
1