Yamaha 2010 XMAX YP125R Service Manual page 401

8. Check the main switch.
Refer to "CHECKING THE
SWITCHES" on page 8-73.
OK ↓
9. Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-73.
OK ↓
10.Check the lean angle sensor.
Refer to "CHECKING THE LEAN
ANGLE SENSOR" on page 8-84.
OK ↓
11.Check the entire ignition system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
OK ↓
Replace the ECU.
NG →
Replace the main switch/immobilizer unit.
NG →
Replace the sidestand switch.
NG →
Replace the lean angle sensor.
NG →
Properly connect or repair the ignition sys-
tem wiring.
8-4
IGNITION SYSTEM