Settings In The Printer Setting; Mfp Set; Default Set - Konica Minolta bizhub 200 Service Manual

Hide thumbs Also See for bizhub 200:

Table of Contents

8. Utility/Counter Mode

Settings in the Printer Setting

A. Proof Print Hold Time

• To change the hold time of the proof print job.

• The default setting is "10 min."

B. Overwrite A4←→Letter

• To set whether to enable or disable the override function of A4 and Letter.

• To enable the function that allows Letter to be used instead of A4, or vice versa, for

• The default setting is "OFF".

C. Document Hold Time

• To change the hold time of print data invoked when a condition, in which memory

capacity has exceeded, at the expiration of which the print data is discarded.

• The default setting is "5Min".

• Setting range: 0 to 30

D. PostScript Error Report

• To set whether or not to print error information when an error occurs during computer

• To print error information when an error occurs during computer printing.

• The default setting is "OFF".

• To set a paper source when none is specified by the printer driver during computer

• To specify a paper source when one cannot be specified by the printer driver during

printing from Windows DOS or in a similar case.

• The default setting is "Auto Paper Select".

Field Service Ver. 2.5 Jul. 2006

Table of Contents

Bizhub 350 Bizhub 250