Mfbs Board - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.5 Jul. 2006
6.3.19

MFBS Board

1. Remove the Upper Rear Cover.
See P.49
2. Remove the IR Right Cover.
See P.50
[1]
[3]
[5]
3. Unplug the connector (CN7) [1].
[2]
NOTE
• If the Fax Kit is mounted, discon-
nect the two connectors (CN7 [1],
CN6 [2]).
4040F2C693DA
4. Remove three screws [3] and the
[4]
4040F2C694DA
5. Remove five screws [5] and the
[6]
NOTE
• Remove the Hard Disk if one is
[5]
mounted.
4040F2C751DA
6. Remove the stopper, RAMS Board
[10]
[8]
7. Remove the MFBS Board [9].
NOTE
[9]
• Remove the MEM Board [10] if
mounted in the expansion slot.
[7]
4040F2C752DA
MFBS Board Assy [4].
MFBS Board mounting bracket [6].
[7], and MEMS Board [8].
6. Other
61