Mount Kit Mk-709 - Konica Minolta bizhub 200 Service Manual

6. Other
6.5

Mount Kit MK-709

1. Remove the Upper Rear Cover.
See P.49
2. Remove the Rear Cover.
See P.50
[1]
[5]
[7]
[9]
[10]
104
3. Remove five screws [1] and Mechan-
ical Control Board Cover [2].
[2]
4040F2C561DA
4. Remove the ferrite core (black) [3].
[3]
4040F2C734DA
5. Remove the Connector [4].
6. Remove two screws [5], shield
clamp, and harness.
NOTE
• When the connector is to be con-
nected, plug the side of the har-
[4]
ness, around which red tape is
wound, in the connector (PJ38) of
4040F2C735DA
the Mechanical Control Board.
7. Remove the Connector [6].
8. Remove two screws [7] and the
[8]
Mount Kit Assy [8].
[6]
4040F2C736DA
9. Remove four screws [9], two shoul-
der screws [10], and the Mount Kit
[11]
Board [11].
[9]
4040F2C737DA
Field Service Ver. 2.5 Jul. 2006