Storage Paddle Drive Clutch - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.0 Apr. 2006
4.4.13

Storage Paddle Drive Clutch

[1]
[2]
B. Reinstallation Procedure
1. Check that the 2-mm hole [2] of the storage paddle drive shaft [1] and the cutout of the
frame [3] are aligned and install the Storage Paddle Drive Clutch Assy [4].
2. Refer to the figure below and check the paddle position [5].
[1]
3. Hook the Solenoid Flapper [7] to the tab [6] of the Storage Paddle Drive Clutch Assy
[4].
4. Attach the C-ring and reinstall the Storage Paddle Drive Clutch Assy.
5. Adjust the spacing between the C-ring and the Storage Paddle Drive Clutch Assy to 0.2
mm and tighten two hexagonal socket head screws.
A. Removal Procedure
1. Remove the Sorted Copy Tray.
See P.16
2. Remove the Horizontal Transport
Unit.
See P.16
3. Remove the Horizontal Transport
Upper Cover.
4349F2C522DA
See P.13
4. Remove the C-ring [1].
5. Loosen two hexagonal socket head
screws [2], and remove the Storage
Paddle Drive Clutch Assy [3].
[3]
4349F2C523DA
[3]
[2]
[7]
[5]
[4]
[6]
4349F2C525DA
4. Other
19