Cleaning Of The Paper Dust Remover - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.5 Jul. 2006
[14]
[15]
[18]
3.5.10

Cleaning of the Paper Dust Remover

[2]
[12]
[13]
[11]
4040F2C548DA
[17]
[16]
4040F2C549DA
[1]
4040F2C540DA
4040F2C541DA
3. Periodical check
5. Remove the E-ring [11] and unplug
the connector [12]. Then, remove the
Registration Roller Clutch [13].
6. Remove the washer [14] and two
wave washers [15].
7. Remove the spring [16], two E-rings
[17], and two Registration Roller
Bearings [18].
NOTE
• When reinstalling the bearings,
make sure that the flanges of the
bearings are on the outside.
1. Open the Right Door [1].
2. Remove the Paper Dust Removal [2].
31