Exposure Lamp - Konica Minolta bizhub 200 Service Manual

6. Other
6.3.32

Exposure Lamp

[3]
• Reinstall the Exposure Lamp harness as follows.
[4]
78
[1]
4040F2C705DA
[2]
4040F2C709DA
Front View Side View
[6]
[5]
4040F2C710DA
Field Service Ver. 2.5 Jul. 2006
1. Remove the IR Upper Left Cover.
See P.48
2. Remove the Front Holding Bracket.
See P.48
3. Remove the Original Glass.
See P.48
4. Move the Exposure Unit [1] to the
removal position.
5. Disconnect the connector [2] and
remove the Exposure Lamp harness
[3].
Back View
6. Remove the screw [4].
7. Slide the Exposure Lamp [5] to the
front and pull it off the holder [6].
4040F2C706DA