Konica Minolta bizhub 200 Service Manual page 813

4. Other
[7]
[10]
[9]
[8]
[10]
[12]
[15]
[17]
10
11. Remove the harness from the wire
[11]
12. Unplug four connectors [7].
13. Remove the C-ring [8], and remove
14. Remove five screws [10], and
[7]
4511F2C517DA
15. Remove the wire saddle [12], and
[13]
4511F2C518DA
16. Remove two screws [14] and two
[14]
4511F2C519DA
17. Remove the Empty [16].
[16]
4511F2C520DA
18. Unplug all the connectors on the
19. Remove the PWB support, and then
4511F2C521DA
Field Service Ver. 1.0 Aug. 2005
saddle.
the bearing [9].
remove the Drive Unit [11].
unplug the connector [13].
shoulder screws [15].
Main Control Board.
remove the Main Control Board [17].